Firmware for the Asus X54HR-SX027D configuration, built on the K54LY motherboard at revision 2.1. It comes as a RAR of about 1.48 MB that holds the image to be written to the SPI flash with a hardware programmer. Technicians use it when a laptop powers on but shows no display or fails to boot after a corrupted update. Since K54LY boards also appear as rev 2.0, check the marking on the PCB before flashing. Save the existing chip contents first and verify that the image size matches the flash capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 21 Aug 2018 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →