Stored as 256 bytes, this is an EDID image for the AUO B101AW02 panel at revision V0. EDID is the identification table inside the display's serial EEPROM, listing vendor code, product number, timings and preferred mode for the host graphics. It comes in handy when the panel shows a black screen or wrong resolution after the EEPROM was erased or overwritten with data for another model. Check the label on the panel matches B101AW02 V0, save the original contents, then reprogram the chip using an I2C-capable EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →