AU Optronics B101AW03, revision V0: this 256-byte binary is the EDID content of that LCD panel's configuration memory. Graphics hardware reads it through the DDC lines to choose the correct timing and native resolution, so a corrupted chip often produces no picture or a generic display entry in the operating system. Technicians restore it by flashing a 24C02-class EEPROM with a programmer such as a CH341A. Verify that the model and revision on the panel sticker match, and read out the current EEPROM before overwriting anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →