Panel EDID for the AU Optronics B101AW06, hardware revision V1, saved as a 256-byte image. It holds the data block the graphics controller queries to learn the manufacturer, timing and resolution of the attached LCD. Typical repair use is recovering a panel whose EEPROM lost its contents, leaving the laptop unable to light up or identify the screen. Since different revisions of a model may differ, confirm V1 on the panel label before writing, keep a backup of the original chip, and use an I2C EEPROM programmer suited to 24C02 parts.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →