EDID firmware for an AUO B101EW02 LCD panel at revision V0, 256 bytes in size. Small binaries like this are not system BIOS but the identification table stored in the panel's own EEPROM and read by the host over DDC. A wiped or mismatched EDID can cause a blank screen, flicker or a wrong native mode, so technicians rewrite the chip with a known good image. Make sure the panel part number and revision agree with this file, dump the existing EEPROM first, and program it with a 24-series compatible tool such as a CH341A.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →