A 128-byte EDID dump for the AU Optronics B116XW02 panel, revision V0. One 128-byte block is the standard base EDID structure, carrying the vendor ID, model code, supported timings and preferred resolution the panel reports to the graphics chip. When this data is corrupted, laptops may show nothing, fall back to a low resolution or fail to detect the internal display. Flash it into the panel's serial EEPROM, commonly a 24C02, with a programmer and clip, only after confirming the model label and backing up whatever the chip currently holds.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →