Base revision V0 of the AU Optronics B133XW01 LCD, captured here as a 256-byte EDID image. The data covers manufacturer code, product ID, native timing and panel parameters that the motherboard reads over the DDC/I2C lines at startup. Repair shops keep such dumps to reprogram a panel whose EEPROM was erased or damaged, a fault that often looks like a dead screen even though the backlight works. Match the model and V0 revision printed on the panel, read and keep the current contents, then write this file with an EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →