Display identification data for the AUO B133XW01 at revision V1, stored as a 256-byte binary taken from the panel EEPROM. Revisions of the same panel model can carry different timing or vendor fields, so this file should go only onto a V1 unit rather than V0 or V2. Typical use is restoring EDID after the chip was wiped or corrupted, which shows up as no image, an unknown monitor in the operating system or the wrong resolution. A 24C02-class EEPROM and a CH341A-style programmer are the usual tools, and reading the original first is wise.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →