EDID dump for an AU Optronics B133XW02 LCD panel, revision V0, saved as a 128-byte binary. That size matches one base EDID block, which holds the panel's identification, supported timings and native resolution. Technicians write it back into the panel's small serial EEPROM, usually a 24C02-type chip on the LVDS or eDP side, when a corrupted EDID causes a black screen, a wrong resolution or a missing panel. Use a programmer such as a CH341A, confirm the panel label shows the same model and revision, and save the original contents first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →