Panel EDID for the AU Optronics B140RW02, version V0, 256 bytes, for a 14.0-inch AUO notebook display. The binary holds the identification and timing block the graphics hardware reads from the panel over DDC during startup. It is used to restore an erased or corrupted panel EEPROM that leaves the screen black, misdetected or at the wrong resolution. Verify the checksum in an EDID editor, confirm the V0 revision on the panel sticker, and back up the existing chip before programming with a CH341A or similar tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →