EDID dump for the AU Optronics B140XTN02, revision 0, a 14.0-inch laptop panel, in 256-byte binary form. It contains the manufacturer code, product ID, timing descriptors and checksum stored in the panel's small serial EEPROM. Use it to repair a display whose identification data is lost or garbled, or open it in an EDID viewer to compare with a chip read. Revision 5 of the same panel may differ, so match the label first, save the original contents and then write with an I2C programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →