A 256-byte EDID for the AU Optronics B140XTN02 panel, revision 5, a 14.0-inch notebook screen according to the AUO B140 prefix. The data identifies the display to the graphics controller and lists its native timing and supported modes. Restoring it with an EEPROM programmer helps when the panel memory is corrupted and the laptop shows a blank screen or detects an unknown display. Check the revision on the panel label, as revision 0 data also exists, and back up the chip contents before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →