Revision V0 EDID for the AU Optronics B140XW01, a 14.0-inch AUO laptop LCD, provided as a 256-byte .bin. It holds the standard descriptor block that tells the host graphics controller the panel's manufacturer, model and timings. Technicians program it into the panel's serial EEPROM to repair corruption that causes no video, flicker or a wrong default mode. Since a later V8 revision of the same part exists, verify the version on the panel sticker and read out the current chip data before overwriting it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →