EDID image for the AU Optronics B140XW01, revision V8, a 14.0-inch notebook display, 256 bytes long. The file records the panel's identity and supported timings as read by the BIOS and GPU over the DDC/I2C bus. Reflashing it with a CH341A-style programmer is the usual remedy for a panel that lost its EEPROM data and is not detected properly. The B140XW01 was made in several revisions, including V0, so confirm V8 on the label and keep a backup of the chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →