EDID data for the AU Optronics B141EW01, revision V3, a 14.1-inch AUO notebook LCD, stored as 256 bytes. It is the identification block a panel provides through its serial EEPROM so the laptop can detect it and apply the correct native mode. Rewriting it is a standard repair when the EEPROM is corrupted and the screen stays blank or misreports its resolution. Check the V3 marking on the panel's rear label, back up the current chip contents, and program the image with an I2C EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →