Second variant of the EDID for the AU Optronics B141EW04 revision V4, a 128-byte binary for a 14.1-inch notebook panel. The data is a single base block containing the vendor code, product number and timing descriptors used by the graphics controller. Technicians use it to rebuild a corrupted panel EEPROM or cross-check other dumps of the same part, since copies may differ in serial or date fields. Validate the checksum in an EDID tool, match the revision printed on the panel and read out the chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →