EDID for the AU Optronics B141XG05, version V0, provided as a 256-byte binary for this 14.1-inch AUO laptop panel. The file holds what the display reports to the graphics controller over the DDC line: vendor, model and supported timings. Typical uses are restoring an erased or corrupted panel EEPROM and checking a doubtful dump before a repair. Write it with an I2C EEPROM programmer such as a CH341A, only after matching the V0 revision on the panel label and saving a backup of the chip's existing data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →