Version V0 EDID for the AU Optronics B154EW02, a 15.4-inch LCD used in laptops, saved as a 256-byte binary. It provides the identification and timing information the display reports over DDC to the graphics hardware. Corrupted panel EEPROMs are a known cause of no-video or wrong-resolution faults, and reflashing a clean image with an EEPROM programmer restores normal detection. Because V0 and V1 of this part may carry different data, check the revision printed on the panel and read out the existing chip before overwriting it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →