AU Optronics B154EW02 V1 panel EDID, 256 bytes, for a 15.4-inch notebook display. The dump contains the descriptor block a laptop reads from the panel's serial EEPROM during boot to identify the screen and pick its native timing. It is useful when a replacement or repaired panel is not recognised, shows garbled output or runs at a fallback mode. Open it in an EDID editor to verify the checksum, then program it with a CH341A or similar tool, after confirming the V1 revision and saving the original chip data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →