Firmware dump attributed to the AU Optronics B156HTN03 panel, revision 8, a 15.6-inch AUO notebook display. At 4 KB it is much larger than a typical 128 or 256-byte EDID, so it likely holds a full EEPROM or controller memory image rather than the EDID block alone; inspect it in a hex editor before use. Such dumps help when a panel shows no image or is detected incorrectly. Check that the target chip capacity matches the file size, confirm revision 8 on the label, and read out the original contents before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →