Display EDID for the AU Optronics B156XTN02, marked revision 0, stored as a 256-byte .bin. The B156 part prefix identifies a 15.6-inch AUO notebook panel. Contents are the identification and timing descriptors read by the BIOS and graphics driver over the panel's I2C/DDC channel. Technicians use it to restore a damaged EEPROM, to check a suspect dump with an EDID viewer, or to confirm checksum integrity. Revision 0 data may not suit later versions of the same panel, so read the label and back up the original chip beforehand.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →