AU Optronics B156XW01 V2 EDID, a 256-byte binary taken from a 15.6-inch laptop display. The file contains the panel's descriptor block: vendor code, product number, detailed timing descriptors and checksum, which the GPU or BIOS reads over the DDC/I2C line at startup. Use it to repair a panel whose EEPROM has been erased or corrupted, or to compare against a suspect chip. Confirm the full part number and V2 revision on the panel back label, and save a copy of the existing contents before programming anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →