Panel identification data for the AU Optronics B156XW02, version V0, a 15.6-inch notebook LCD going by the AUO B156 prefix. The 256-byte .bin is an EDID image, the block the display stores in a serial EEPROM so the system can learn its timings and native mode. Restoring it is a common fix after a bad flash or EEPROM corruption leaves the screen dark or stuck at a low resolution. A CH341A-type programmer with a clip is typical; check the version on the panel sticker, since V0 and later revisions can differ.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →