Display identification dump for the AU Optronics B156XW02, revision V3, a 15.6-inch notebook panel; no laptop is named. The file is 256 bytes, equal to a full 24C02 EEPROM read, and contains the EDID the graphics chip reads through the DDC lines to configure the screen. Rewriting it restores proper detection when the panel EEPROM has been damaged and the laptop shows no image or a generic display. Verify the V3 revision against the panel sticker, check the checksum, and keep a copy of the old data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →