EDID dump for the AU Optronics B156XW03 panel, revision V1, a 15.6-inch notebook LCD; the name gives no laptop model. At 256 bytes it matches the capacity of a 24C02-class EEPROM on the panel. The data block identifies the panel and lists its supported timings so the graphics controller can set the native mode. Technicians reflash it via I2C programmer or DDC software when the EEPROM is corrupted. Check the panel sticker for the exact model and revision, and read out the existing data before overwriting it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →