Panel EDID for the AU Optronics B156XW04 V0, a 15.6-inch laptop display, with no host device stated. This 256-byte image corresponds to a full 24C02 EEPROM and contains the identification data read by the video chip over DDC/I2C at startup. A corrupted copy can leave the screen dark, stuck at a low resolution or shown as a generic monitor, and rewriting it with a programmer is the usual fix. As revisions such as V0 and V5 can differ, confirm the panel label, and back up the chip first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →