Second dump of the AU Optronics B156XW04 V5 15.6-inch panel EDID, saved as a numbered copy, likely read from a different unit than the first file. The image is 256 bytes, the size of a 24C02 EEPROM. Opening both copies in an EDID editor allows checking checksums and choosing a clean source before programming. The data is restored to a panel EEPROM when corruption breaks display detection or resolution. Match the panel label and V5 revision, and save the original contents before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →