Display EDID dump for the AU Optronics B170PW06 V2, a 17-inch laptop panel, with no host machine specified. The file is 256 bytes, equal to a 24C02 EEPROM, and contains the data block the graphics controller reads at power-on to set resolution and timing. Rewriting it is the usual remedy for panels whose EEPROM has been corrupted, leaving the display blank or misidentified. An I2C-capable programmer or DDC tool does the job. Verify that the panel revision is V2, and keep a copy of the original contents before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →