EDID for the AU Optronics B173HW02 panel, revision V1, a 17.3-inch notebook display; no laptop model is given. The 256-byte image matches a full 24C02 EEPROM and holds the panel identity and timing descriptors read by the GPU over DDC/I2C. It helps when a corrupted panel EEPROM causes a black screen, a missing native resolution or an unknown monitor in the system. Flash it with a programmer and clip or a DDC utility. Check the model and revision against the panel label, and back up the existing data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →