EDID image for the AU Optronics B173RW01 V3, a 17.3-inch laptop panel, with no host device named. At 256 bytes it covers the full space of a typical 24C02 panel EEPROM. The EDID tells the video chip the native mode, timings and vendor ID over the DDC bus, so a damaged copy can cause no image or an incorrect resolution. Reflash it with an I2C programmer or DDC software. The V3 revision matters, since data from a different revision may not match the panel timings, and the existing contents should be saved first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →