Panel identification dump for the AU Optronics B173RW01, revision V4, a 17.3-inch notebook LCD. No laptop model is named. The 256-byte file matches the size of a 24C02 EEPROM and contains the EDID the graphics controller reads over DDC/I2C to configure resolution and timing. It is used when the panel reports garbage or nothing at all, leaving a black screen or a generic display entry. Before writing it, confirm the panel model and V4 revision on the back label and read out the existing data as a backup.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →