A second copy of the EDID for the AU Optronics B173RW01 V4 17.3-inch panel; the numbered suffix suggests an alternate dump from another unit, and its contents may differ slightly from the first. The image is 256 bytes, consistent with a full 24C02 EEPROM read. Comparing both versions in a hex or EDID editor helps choose a clean one and check the checksum. Technicians write this data back to a panel whose EEPROM has been corrupted. Match the panel label and revision, and save the original bytes before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →