Panel EDID for a B133XW02 V0 13.3-inch LCD, with HPCQ35 in the name, which points to an HP Compaq CQ35 laptop. The image is 128 bytes, one base EDID block containing manufacturer code, panel identifiers and timing descriptors. It is flashed into the small EEPROM on the panel or its controller when corrupted contents leave the display undetected or stuck at a wrong resolution. An I2C-capable programmer or a DDC writing tool can be used. Verify the panel model and V0 revision, and save the current contents beforehand.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →