EDID dump for the B141EW04 laptop LCD panel, revision V4, labelled for HP machines. The model code follows AU Optronics panel naming, where B141 marks a 14.1-inch notebook screen. At 128 bytes it is a single base EDID block, the identification data the panel reports to the graphics controller over DDC/I2C. Technicians write it back when a corrupted panel EEPROM causes no picture, a wrong resolution or an unrecognised display. Confirm the panel label and revision first, and save the existing contents before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →