Firmware dump for a Bango Max G5 I1 system with board code N240PUMB-0D, stored as a 4 MB RAR archive. The name gives no further detail about version, chip type or tested status, so inspect the contents before flashing. Such a file is typically programmed into the SPI BIOS chip with a programmer like a CH341A to recover a unit that does not boot. Compare the board code printed on the PCB with N240PUMB-0D, keep a backup of the original chip and confirm the image size fits the flash.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 May 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 26 Oct 2021 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 13 Jul 2025 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →