Generic BIOS binary called bios.BIN with no model, board or version information in its name. At 1 MB it corresponds to an 8 Mbit SPI flash, a capacity common on older boards, EC chips or small embedded devices. Without identifying details it should be opened in a hex editor to look for vendor strings or a BIOS version before use. Only write it to a chip of matching size, and always save a backup read of the original flash so the board can be restored if the image proves wrong.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @Laptopdesktopbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →