Version 1.0 BIOS for a G41T-M6 motherboard, dumped from a Winbond W25X80 chip, which is an 8 Mbit SPI flash and matches the 1.00 MB size. The raw .bin is meant for direct programming with an external programmer when the board fails to post. Select the W25X80 or an equivalent in your programmer software. Verify the board revision against the image, and back up the original chip contents before erasing it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →