BIOS image for the Gigabyte GA-H170-D3H desktop motherboard, revision 1.01, as a raw 16 MB binary. A dump of this size corresponds to a 16 MB SPI flash chip and is used to reprogram a board with corrupted firmware through an external programmer. Read and save the original chip before writing, because it holds board-specific data such as the MAC address. Check that the board revision printed near the slots matches 1.01 and the chip capacity equals the file size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptop_bios_schematic. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →