Gigabyte GA-H81M-S firmware for board revision 1.0, version F2, supplied as a raw bin inside a 2.87 MB ZIP. It suits an Intel H81 microATX board that is stuck in a boot loop or shows no display because of a damaged BIOS chip. A technician extracts the image and programs it directly onto the SPI flash with a hardware programmer. Gigabyte boards are revision-specific, so check that the PCB is marked rev. 1.0, compare the image size with the chip capacity, and read out the existing contents before erasing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 2 Mar 2022 | Open file on RM Schematics |
| @sboisworld | 14 Mar 2025 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →