Compal LA-D822P rev 1.0 firmware for the BKD40 platform, version A00 from 2016-07-01, supplied as a 16MB full image inside a RAR archive and labelled as a working BIOS. A 16MB dump matches a 128Mbit SPI flash, so check the chip marking before programming with a CH341A or a similar tool. Compal uses the LA- prefix on its board numbers. Always read and save the original chip contents first, since serial, service tag and MAC data may need restoring after the write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 3 Aug 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →