BOE HB140WX1-100 panel EDID, a 256-byte image for this 14-inch-class laptop display. The -100 suffix distinguishes it from the -300 variant, which may carry different identification or timings. Graphics drivers and firmware read this data over the DDC I2C bus to configure resolution and panel timing. A damaged copy can lead to a black screen or wrong resolution. Write it to the panel EEPROM with a CH341A-style programmer or an EDID utility, after reading out and saving the original, and verify the checksum.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →