EDID binary for the BOE HB140WX1-300 14-inch-class laptop panel, 256 bytes, covering the base block and an extension block. It describes the panel to the host: manufacturer code, product ID, native resolution and timing data used for LVDS or eDP setup. Reflashing it helps when a panel shows nothing, flickers at startup or appears as an unknown display because its EEPROM was corrupted. Note that the -300 suffix differs from the -100 version, so check the panel sticker and back up the chip before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →