Raw 16 MB BIOS binary for the Compal board LA-E082P, project CDM70, revision 2.0 (A01), dated 2017-06-29 and reported as working. The file size corresponds to a 128 Mbit SPI flash chip, and it is written with an external programmer when firmware corruption leaves the board without display or stuck in a boot loop. Compal identifies boards with the LA-xxxxP format. Check the PCB number and revision, save the original chip contents before erasing, and verify the write against the file afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →