Tested BIOS for the Compal board LA-E142P, revision 1.0 (A00), with the CDP70 platform code. The image is dated 2016-11-09 and sized for a 16MB flash chip. Compal's LA-xxxxP numbering and the A00 suffix are typical of boards built for Dell. The image is intended for reprogramming the SPI flash when a machine will not power on properly or the firmware is damaged. Check the board number on the PCB, back up the existing chip, and confirm it is 16MB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 20 Jan 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →