EDID image for a CHI MEI panel labelled 150X3-L07, revision C4, delivered as a 256-byte binary containing a base block and most likely an extension. The name carries no laptop model, so the panel sticker is the only reference to match. EDID tells the host which resolution and timings to drive; when the EEPROM is blank or damaged the system may show no picture or a generic monitor. Program it with an I2C EEPROM tool or EDID writer, keeping a backup of the original data and confirming the C4 revision first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →