Alternative 128-byte EDID dump for the CHI MEI N101L6-L0D panel; the (2) in the name marks it as a second copy, distinct from the 256-byte version of the same model. At 128 bytes it contains only the base EDID block with identification, native timing and checksum. It is useful for comparing against another dump or for restoring an erased panel EEPROM that leaves the display black or misdetected. Verify the checksum in an EDID editor, back up the current chip, and make sure the panel model and revision on the label match.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →