Panel EDID data for the CHI MEI N101L6-L0D, stored as a 256-byte binary, which typically covers the base block plus an extension block. The file defines how the panel identifies itself to the graphics controller: vendor code, native mode and timing parameters. Repair shops flash it when a swapped or damaged LCD no longer reports a valid EDID and the laptop falls back to a low resolution or stays dark. Several L0D variants exist in this collection, so compare the revision on the panel label and keep a copy of the original chip contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →