EDID binary for the CHI MEI N101L6-L0D panel in revision C1, 256 bytes long. The C1 marking separates it from other L0D dumps, so match it to the revision printed on the back of the LCD before using it. EDID is read by the BIOS and graphics driver over DDC/I2C to set resolution and timings; a corrupted copy can mean a blank screen or wrong panel detection. Technicians typically write it into the panel EEPROM with a CH341A-type programmer or a vendor EDID utility, saving the existing data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →