EDID dump for a CHI MEI N101LGE-L11 laptop LCD panel, revision C1, saved as a 256-byte binary. That size usually means a 128-byte base EDID block plus one extension block. Panel EDID lives in a small I2C EEPROM on the panel or timing controller and tells the system the native resolution and timings. When a replaced or corrupted panel shows no image, wrong resolution or no backlight control, technicians rewrite this data with a programmer such as a CH341A. Read and save the existing contents first, and confirm the panel label and revision match.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →