Panel EDID dump for a Chi Mei N101N6 L01, a 10.1-inch LCD by Chi Mei part numbering, the size used in many netbooks. No revision is stated. At 256 bytes the file matches a complete 24C02 EEPROM, the usual storage for display identification. Technicians write it back when the panel is not recognised, shows nothing or runs at the wrong mode. Inspect it in an EDID viewer, confirm the label on the panel, and read out the existing data before flashing with an I2C programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →